roof maintainance

The primary job of most roofs is to keep out water. The large area of a roof repels a lot of water, which must be directed in some suitable way, so that it does not cause damage or inconvenience.

Flat roof of adobe dwellings generally have a very slight slope. In a Middle Eastern country, where the roof may be used for recreation, it is often walled, and drainage holes must be provided to stop water from pooling and seeping through the porous roofing material.

>> Realted Post: Better Methods for Roofing Businesses to Track Potential Customers and Potential Sales.

Areas prone to heavy snow benefit from a metal roof because their smooth surfaces shed the weight of snow more easily and resist the force of wind better than a wood shingle or a concrete tile roof.

During heavy rain and strong winds, will either puncture your roofing material or fall off your roof breaking your roof. Check the distance of the nearby tree and trim off overhanging branches. 

1. Clean your gutters and downspouts

Frequent and heavy rain means excessive water. Water, itself, will always find its way to flow through. 

If your gutters are filled with debris, leaves, twigs, or even moss growth, your gutter will accumulate this excess water which can backflow to your roof and cause leaks or it can collapse your gutter because of the excessive weight. 

Check your downspout if it is not clogged, know the standard drainage time and check if it passes if not, have it unclogged by applying pressurized water or contacting your local contractors.

Remove any debris that can puncture through your roof and create holes that can turn into leak points. Wash off any moss growth which if left untreated will grow to your entire roof area and eventually damage your roofing material. 

>> Related Post: Comprehensive Review of Roofing Costs.

2. Seal vents, chimneys, and/or skylights 

The termination between your skylights and vents is the most common part of the roof for leak points. 

When not secured properly or if the materials used to seal the gap are not effective or have undergone damage by cracking, leaks can happen especially if the rain is falling at an angle due to the strong winds. 

Sealant or caulk to be used for roofing application should not only be of high quality but must be suitable to your area’s weather conditions to lessen the possibility of changing it time over time. 

>> Related Post: How Do You Know Your Roof Was Installed Correctly?

3. Repair or replace damages 

If you have found damage on your roof during your inspection, have it repaired immediately. 

Contact and hire your trusted roofing contractor to have an in-depth assessment of the damages on your roof. Ask for the timeline of repair works which should be done at least days before the rainy season comes. 

Make sure that if not replaced, the repairs should be delivered well to avoid the recurrence of these problems. 

>> Related Post: Common roof problems in US and how to fix them?

But if damages are manageable, you can fix it yourself and go to your local hardware store and buy a material within the good standard.

Conclusion

Swadley Roof Systems offers the best roofing services in the Houston, Austin, San Antonio and Dallas area.